Small Brushes Large Brushes & Stiff Brushes 1/2″ Whitworth

£13.50£20.00

Clear

Description

We have a range of small 2″ – 3″ soft and medium brushes and 4″ -16″Stiff brushes.

These Brushes will fit Flu Flex Rods that we supply, and rods with a 1/2″ whitworth thread.

All brushes have a 1/2 whit (standard) flu flex brass Fitting you can choose to add a adaptor to fit bailey rod / drain rods, Also all have guide balls.

2″ = 50mm Select a 2″ – Our 2″ brush is made to 55mm Diameter, the optimum size for sweeping a 2″ / 50mm pipe
3″ = 76mm Select a 4″ – Our 3″ brush is made to 86mm Diameter, the optimum size for sweeping a 3″ / 76mm pipe
4″) = 100mm Boiler Pipe – Select a 4″ – Our 4″ brush is made to 120mm Diameter, the optimum size for sweeping a 100mm Boiler Pipe

(5″) = 125mm liner – Select a 5″ – Our 5″ brush is made to 145mm Diameter, the optimum size for sweeping a 125mm liner

(6″) = 150mm liner – Select a 6″ – Our 6″ brush is made to 172mm Diameter, the optimum size for sweeping a 150mm liner
(7″) = 175mm liner – Select a 7″ – Our 7″ brush is made to 195mm Diameter, the optimum size for sweeping a 175mm liner
(8″) = 200mm liner – Select a 8″ – Our 8″ brush is made to 228mm Diameter, the optimum size for sweeping a 200mm liner
(9″) = 230mm liner – Select a 9″ – Our 9″ brush is made to 254mm Diameter, the optimum size for sweeping a 230mm liner
(10″) = 254mm chimney – Select a 10″ – Our 10″ brush is made to 290mm Diameter, the optimum size for sweeping a 254mm chimney
(12″) = 305mm chimney – Select a 12″ – Our 12″ brush is made to 340mm Diameter, the optimum size for sweeping a 305mm chimney
(16″) = made to 420mm for use on 15″ & 16″ chimneys

1 review for Small Brushes Large Brushes & Stiff Brushes 1/2″ Whitworth

  1. Rated 5 out of 5

    Used use a bottle brush that lasted 1 sweep the 2 inch one it great with the ball cleaned many a AGA with that.

    Used use a bottle brush that lasted 1 sweep the 2 inch one it great with the ball cleaned many a AGA with that.

Add a review

Your email address will not be published. Required fields are marked *